CMH 630 W FLOWER 3100K LINKABLE by Calitek
Calitek offers a revolutionary and innovative horticultural lighting system!
The ballast and the reflector are combined in one and the same module for an optimization of the quality of the material and an incomparable ease of installation.
The CALITEK CK-1000 Horticultural Lighting System is a software-controlled digital control device that has been designed to give the most selective growers versatility and lighting performance for plants.
The flattest complete horticultural lighting system on the market!
Supplied with a Double Ended HPS 630W 3100k bulb
This design can run a lamp at rated wattage and is composed of a four-phase controller to adjust the ballast output to 600W, 630W, 750W, 945W, 1000W or Super Par, which will increase the brightness by 15%. Be sure to run your lamp continuously at 100% for 10 minutes before proceeding to other settings. Switching parameters quickly can harm the lamp.
SMART START ™ IGNITION CONTROL
This revolutionary feature, unique to our products, makes the CALITEK digital ballast the safest and most reliable ballast when used in automated multi-lamp applications. When multiple units are connected to the same mains circuit, our built-in ignition control software will fully balance the electrical draft by igniting one lamp at a time to avoid electrical surges and spikes which can overload the mains circuit and cut-off systems. trigger circuit. For increased efficiency, this feature is activated alongside our ”Soft Start Technology”.
SOFT START TECHNOLOGY
Soft Start technology extends lamp life by stopping current flow to the lamp and preventing lamp overload. When the ballast starts from cold, there will be a 3-second delay before ignition. After switching on, there will be a series of random 0-2 second delays before full brightness is reached after approximately 3-5 minutes. SoftStart technology is also activated when you increase and decrease the power to the lamp using the ’Smart-Step’ function.
The CALITEK digital ballast is suitable for use with all good quality Double Ended High-Pressure Sodium (HPS), Double Ended Metal Halide (MH), and Double Ended CMH lamps. For a guaranteed perfect combination and the best results, we recommend CALITEK horticultural lamps. CALITEK lamps are optimized for use with high-efficiency electronic ballasts with adjustable output.
600W: Suitable for HPS or MH / 630W bulbs: Suitable for 630W, HPS or MH / 750W CMH bulbs: Suitable for HPS or MH / 945W bulbs: Suitable for 945W, HPS or MH / 1000W bulbs: Suitable for HPS or MH / SUPER PAR bulbs: Suitable only for HPS or MH bulbs
Attention it is imperative to use MH or HPS bulbs with a power of 1000W.
Also, for CMH bulbs, it is imperative to place the dimmer on the power of your bulb, 630W or 945W.
The CALITEK housing design acts as a superior heat sink making the ballast extremely cool on the go without the need for internal fans.
COMPLETE CIRCUIT PROTECTION
The CALITEK digital ballast uses a sophisticated circuit control system controlled by a system not seen in ballasts from other manufacturers. The system protects against a series of faults, including open circuit protection, short circuit protection, over-voltage protection, under-voltage protection, and over-temperature protection. On ignition, the ballast performs a 3-second circuit test and, if a fault occurs, the ballast will go into protection mode to prevent damage to the ballast and lamp.
HIGH ENERGY EFFICIENCY
CALITEK digital ballast is up to 30% more efficient than standard magnetic ballast producing more lumens of light per watt of energy consumed. Efficiency does not decrease and is maintained throughout the life of the unit.
The CALITEK digital ballast has no noisy internal fans and is completely silent in operation.
Lamp: 1000W OF HPS / MH
Input power: 1000W
Input voltage: 240V, 50 / 60Hz
Input intensity: 4.4 A / 240V
Inrush intensity: 60 A / 220Vac
Maximum output power: 1150W
Leakage current: 0.5mA max at 180-300Vac
THD: <10%, 60Hz
Power factor:> 0.99 (> 0.99 max,> 0.95)
Input voltage range: 100-265Vac
Ambient temperature: -45 ° C to 80 ° C
Unit weight: 6.4Kg
Unit dimension: 64.4 x 37.3 x 10.5 cm
Bulb failure detection: YES
Ignition time: 3-10 seconds
Input frequency: 47/63 Hz
Protections: Open circuit / Short circuit / Over voltage / Under voltage / Over temperature
Insulation voltage: Input / Gnd 1600Vac – 5mA 1Min
Insulation resistance: Input / Gnd 50MΩ – 500Vdc 1Min
Dimmer: 600/630/750/945/1000 / SUPER PAR
Open circuit voltage: <300V
Ignition voltage: 3-5 KV
Output frequency:> 100KHz
Lamp power: CONSTANT
RF interference: NO
Operating temperature: 0 ° C to + 30 ° C
Storage temperature: -45 ° C to + 80 ° C
Operating humidity: 20 to 95%
Storage humidity: 10 to 95%
IP environment: IP20
Ballast warranty: 2 years